How do I set up my new Heat Lamp?

To set up your heat lamp follow these simple steps:

1. Remove silver screws from black bulb holder.
2. Place the bulb holder at the top of the shade.
3. Replace the screws through the holes in the shade and bulb holder.
4. Insert the bulb (make sure you do not over-tighten).
5. Place the hook of the guard through the hole on the rim of the shade.
6. Squeeze the guard gently so that it sits within the lip of the shade.

 

 

Based in the UK we have worked passionately with suppliers & designers for many years aiding their product development, but we decided to get the best products for our customers it is best to design and build our own.

 

CONTACT DETAILS

Isaacs
Ashton Road
Minety, Wiltshire
SN16 9QP

Email: info@titanincubators.com
Telephone: 0800 009 6270